Superex Wall Panel Adhesive (FRP)
$21.99
Description
TECHNICAL DATASHEET
SUPRABOND(FRP) Spray adhesive is designed for bonding approved Wall panel in verticle application. It can be use in commercial and residential application. It works with approved FRP( Fiber Reenforced Panel),NRP,plastic and comosite wall panels The surfaces must be prime before adhesive application.
BOND TO SUBSTRATES (Adheres to)
Water resistant dry wall,Hardie board,Green board,Densshield, plywood,Metal,Fiberglass,Glass primed sheetrock ,melamine plastic and wood laminate
PRODUCT BENIFITS
Totally non toxic water based adhesive
Meets environmental air quality standard
Zero Voc. Does not contain 134a
Easy to clean adhesive with warm soapy water when wet
or solvent when dry.
High moisture pH resistance adhesive
Highly instant aggressive grab.No bracing required.
Long open time ,2 to 4 hours depending temp and humidity
Faster installation compare to labor intensive trowel adhesive
Use 50 to 60% less adhesive compare to trowel adhesive
Faster application, Increases productivity, Saving time and money
In occupied space,does not required to shut down HVAC
May contain natural latex
SURFACE PREPARATION
Store adhesive at min 68°F 24 hours prior to use.
Do not subject aerosol to freezing temp
Surface to be bonded must be free from moisture, grease,rust,dirt or any contaminates.
While adhesive is drying before application of wall panel adhesive must keep dustfree
APPLICAION & CLEAN UP
Protect from overspray with a spray shield, drop cloths, paper or masking tape.
Overspray be cleaned with warm soapy water when wet or solvent when dry.
If dried adhesive is collected around nozzle gently scrap to unplug tip.
Aim at the substrate and press tip or pull trigger with finger.
It is advisable to apply light amount of adhesive to both surfaces.
Ensure proper alignment before application of pressure. Reposition as necessary
Apply firm pressure to complete bonding.Coverage;- 45-75 sq ft per 21 oz can
Open time can be from 1-1.5 hours depending on temp/humidity
FIRST AID PROCEDURE
Inhalation: Extended inhalation of vapors or mist may cause headache, nausea and irritation of nose throat and lungs.Remove patient to fresh air.
Eye contact: Direct contact may cause slight irritation and redness.Flush eyes with plenty of water for 15 minutes.consult a physician if irritation persists.
Skin contact: prolonged and repeated contact may cause slight irritation. Wash with water untill clean .consult a physician if irritation persists.
Ingestion: If ingested call a physican immidiately . Remove stomach content by gestric suction or induce vomiting as directed by physician.
CLASSIFICATION:
Non -hazardous under the OSHA standard (29CFR 1910.1200)
Not controlled product under the canadian HAZMAT information system.
TECHNICAL DATA:
BASE: Water base Acrylic with Natural latex
ODOR: Mild odor
SHELF LIFE: Unopened 2 years
OPEN TIME: 2.to 4 hours depending Temp and humidity
DRY TIME: 15 – 40 minutes
VOC: 0.0 g/ml
RESISTANCE TO MOISTURE: 8.5 lb vapor emissions/90% humidity/10.5 pH
BONDING COVERAGE: 45-75 sq ft per 21 oz can
The technical information stated herein upon research and experience at Superex and believed to be reliable, but such information does not constitute a warranty nor should be construed as permission or recommendation to use any invention covered by a patent. Since Superex industries have no control over the conditions under which products are transported stored, handled the purchaser and /or user must determine for themselves via preliminary tests or otherwise, the suitability of the products for their specific purpose.
